pharmaceutical freeze dryer for sale Canada Opções
pharmaceutical freeze dryer for sale Canada Opções
Blog Article
We have some really great 'techy' type guys here who are, as they have been exploring the FD mechanics and sharing that in their posts, writing what is turning out to be a 'troubleshooting manual' for us less capable folks.
We preserve our favorite foods, which means I know my family will eat them when it’s time to break them out, whether that’s for a camp out, family vacation, or the apocalypse.
(had to replace the whole galvanized T piece with new wires in it) Seems they are epoxied in there, and in my experience passthroughs are a problem spot, so it's not at all surprizing that there was a slight leak there. In any case, I thanks the folks at HR for sending parts and sticking with me throughout.
Tony, if you see this, I went ahead and purchased the catch can. Do you think it's okay to just purchase a reducer to go from the size of the exhaust to the size of the hose that came with the can?
If you have a high volume lab, it’s usually a good idea to have more than one to be safe. Freeze drying ice water hash is the #1 way to dry it because it increases your production speed, enhances its color, retains more delicate terpenes, and sharply limits microbial activity.
It’s super simple, if you aren’t running an Oil Free pump (which we strongly suggest), you should change the vacuum pump’s oil every 20-30 runs (approximately once every month or two with daily use) and ensure the interior chamber as well as your trays are cleaned frequently.
They can last for decades, with regular maintenance of course. It’s like any other major appliance, it has running parts and will need to be maintained or repaired as needed.
7) Next up the drain line. This not only deminishes condensation but also eliminates an unnecessary hot spot into the chamber.
We sold a grainmill also, Buy Home Small Pro Freeze Dryer hyped by a friend who had several. Used it some also. Nothing happened and other things incl food was donated or tossed. Now Know More retired, who has time or money to throw away again? not me.
Reinstalled the vacuum hose and capped far end of hose to do a hose test. (same results as pump alone)
The only downside is that the interior is now so cold that defrost time has doubled! I use a large high volume fan to defrost the unit, not the heat trays. It used to be a 15 minute job, now it is closer to 30 minutes.
4 trays of corn takes only 16 hours, I would estimate that we have cut our FD times by 30% or more! Condensation has been decreased by 90% - pelo more dripping down the interior front panel and collecting on the aluminum base. There is still condensation around the front door seal, but it no longer drips down the front onto the floor.
Depending on how you want to use freeze dried food, it doesn’t have to be reconstituted. There are some freeze dried foods I like to powder in my blender or food processor and then add to other foods. These powders can be used in smoothies, soups, and baked goods.
Of course, if someone used a larger can, say a #10, that is bigger than the top of the container that surrounds the filter and captures the oil, then the "disk" wouldn't be needed at all. In that case, an AN8 fitting might work -- or maybe there are longer ones out there somewhere.